Bracelet with Swarovski Crystal and Sterling Silver Beads and Bead Caps

STEP 1
String one Swarovski crystal astral pink 6mm bicone onto a headpin. Using a pair of chain-nose pliers, round-nose pliers and flush-cutters, form a simple loop on the straight end of the headpin. Repeat to create a total of twelve Swarovski crystal astral pink 6mm bicone drops.

Repeat to create the following:
  • Six Swarovski rose peach 6mm rondelle bead drops using one Swarovski rose peach 6mm rondelle and one headpin
  • Six Swarovski vintage rose 6mm round bead drops using one Swarovski vintage rose 6mm round and one headpin
  • Six Swarovski air blue opal 6mm rondelle bead drops using one Swarovski air blue opal 6mm rondelle and one headpin
  • Eleven Swarovski padparadscha 4mm round bead drops using one Swarovski padparadscha 4mm round and one headpin
STEP 2
Using a pair of chain-nose pliers and round-nose pliers, form a 6mm C-shape on the straight end of an eyepin with the loop perpendicular to the C-shape. Form a simple loop on the end of the eyepin parallel to the C-shape. This is going to be the cup handle for the teacups made with the sterling silver 6x6mm bell shape beads. Repeat to create a total of four handles.

Using a pair of chain-nose pliers and round-nose pliers, form a 4mm U-shape on the straight end of an eyepin with the loop perpendicular to the U-shape. Form a simple loop on the end of the eyepin parallel to the U-shape. This is going to be the cup handle for the teacups made with the sterling silver 6x4.5mm bead cap. Repeat to create a total of two handles.
STEP 3
String one Swarovski light smoked topaz 3mm bicone, one sterling silver 6x6mm bell shape bead (bell over 3mm crystal), the perpendicular loop on the C-shaped eyepin, and one sterling silver 10x2mm beaded edge heishi bead onto a headpin. Form a wrapped loop on the straight end of the headpin.

Repeat to create two more bell bead teacup bead drops using the sterling silver 10x2mm beaded edge heishi bead and one bell bead teacup bead drop using the silver-finished 10mm heishi bead.

Open the loop on one Swarovski crystal astral pink 6mm bicone bead drop. Pass it through the wrapped loop on the bottom of the 6x6mm bell shape bead teacup drop. Repeat to attach one Swarovski air blue opal 6mm rondelle bead drop, one Swarovski rose peach 6mm rondelle bead drop and one Swarovski vintage rose 6mm round bead drop to the remaining wrapped loops on the bottom of the bell teacups.
STEP 4
Fit one U-shaped eyepin over the edge of a sterling silver 6x4.5 bead cap with the perpendicular loop matched up with the hole on the inside of the bead cap. String the eyepin and bead cap onto a headpin (with the head of the pin on the inside of the bead cap). String one silver-finished 10mm heishi bead onto the headpin. Finish the straight end of the headpin with a wrapped loop. Repeat to create a total of two bead cap teacup drops.

Open the loop on one Swarovski crystal astral pink 6mm bicone bead drop. Pass it through the wrapped loop on the bottom of the 6x4.5mm bead cap teacup drop. Repeat to attach a Swarovski air blue opal 6mm rondelle bead drop to the second bead cap teacup drop.
STEP 5
String one sterling silver teapot stand, one sterling silver 10mm round bead, one sterling silver teapot top and one Swarovski light smoked topaz 3mm bicone onto a headpin. Finish the straight end of the headpin with a wrapped loop. Repeat to create a Swarovski coral pearl teapot using one sterling silver teapot base, one Swarovski coral 8mm round pearl and one sterling silver teapot top.
STEP 6
Using a pair of chain-nose pliers and flat-nose pliers, open one silver-plated 4mm jumpring. Pass it though the loop on one Swarovski padparadscha 4mm round bead drop, one Swarovski rose peach 6mm rondelle bead drop, one Swarovski crystal astral pink 6mm bicone bead drop and the jumpring attached to the lobster claw clasp. Close the jumpring.

Repeat to attach the following components to the links on the bracelet using one 4mm jumpring:
  • One bell teacup bead drop (jumpring through the loop on the handle) to the left side of the second 7mm link, the right side of the fourth link, the link between the eighth and ninth 7mm links and the link between the tenth and eleventh 7mm links
  • One bead cap teacup bead drop (jumpring through the loop on the handle) to the left side of the third 7mm link and the left side of the seventh 7mm link
  • One teapot bead drop to the right side of the fifth 7mm link and the link between the ninth and tenth 7mm links
  • One Swarovski padparadscha 4mm round bead drop, one Swarovski air blue opal 6mm rondelle bead drop, one Swarovski crystal astral pink 6mm bicone bead drop to the right side of the first 7mm link, the center of the fifth 7mm link and the left side of the seventh 7mm link
  • One Swarovski padparadscha 4mm round bead drop, one Swarovski vintage rose 6mm round bead drop, one Swarovski crystal astral pink 6mm bicone bead drop to the right side of the second 7mm link, the left side of the sixth 7mm link and the center of the eleventh 7mm link
  • One Swarovski padparadscha 4mm round bead drop to the right side of the third 7mm link
  • One Swarovski padparadscha 4mm round bead drop, one Swarovski rose peach 6mm rondelle bead drop, one Swarovski crystal astral pink 6mm bicone bead drop to the link between the third and fourth 7mm link and the left side of the tenth link
  • One Swarovski rose peach 6mm rondelle bead drop to the link between the sixth and seventh 7mm links, the left side of the eighth 7mm link and the right side of the ninth 7mm link
  • One Swarovski vintage rose 6mm round bead drop to the link between the tenth and eleventh 7mm links

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You