Earrings with Swarovski Crystal and Gold Chain
Lighting Ibiza Earrings
-- Designer --
Courtesy of Swarovski
If a product is not available, please feel free to substitute similar products from our offerings:
- Pearl, Swarovski crystal gemcolors, ivory, 3mm round (5810) (20 pearls)
- Pearl, Swarovski crystal gemcolors, ivory, 8mm round (5810) (2 pearls)
- Crimp beads, gold (10 crimp beads)
- Jumprings (4 jumprings)
- Headpins, gold (2 headpins)
- Eyepins, gold (2 eyepins)
- Pliers, crimping
- Pliers, flat-nose
- Pliers, round-nose
- Pliers, side-cutter
Bead, Swarovski crystal, Capri blue, 3mm round (5000) (88 beads)
Bead, Swarovski crystal, crystal golden shadow, 3mm round (5000) (172 beads)
Chaton, Swarovski crystal rhinestone, crystal golden shadow, foil back, 4.4-4.6mm Xirius round chaton (2 chatons)
Earring, French hook, gold, with loop and setting (2 earwires)
Nylon thread, transparent, 0.25 mm, 3m
Chain, gold, 8cm
- Beads, Swarovski crystal, round
- Chaton, Swarovski crystal rhinestone, Xirius round (1088)
- Earwires, leverback
- Thread, nylon
- Chain, gold
Insert Swarovski round stones art. 1088 SS19 crystal golden shadow into the setting on the French earhook and close the prongs using tweezers.
Insert 4 Swarovski bead art. 5000 3mm crystal golden shadow onto an eyepin and turn a loop at the end.
Cut two 18mm chains and connect them to the French earhook using a 4mm jumpring.
Attach both chain ends into the loops of the eyepin created in Step 2.
Cut five 30cm long nylon threads. Center one thread between the last bead and the loop on the eyepin that is attached to the chains (see illustration for clarification). The threads will be doubled. Tie a knot to secure. Slide on one Swarovski bead art. 5000 3mm crystal golden shadow, one Swarovski pearl art. 5810 3mm crystal ivory pearl, twelve Swarovski beads art. 5000 3mm Capri blue, one Swarovski pearl art. 5810 3mm crystal ivory pearl and thirteen Swarovski beads art. 5000 3mm crystal golden shadow onto the doubled nylon thread after the knot. Insert a crimping tube onto the bottom of the nylon thread and crimp it to secure all the beads.
Repeat Step 5 four more times to get four more strings with Swarovski crystals in the order shown in illustrations with this step. Insert Swarovski pearl art. 5810 8mm crystal ivory pearl onto a headpin and turn a loop at the end. Attach it into the 4mm jumpring attached in the center of the French earhook. Repeat Steps 1 - 6 one more time to get the second earring.
: : : Additional Resources : : :
The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We
encourage you to substitute different colors, products and techniques to make the design your own.
Have a question regarding this design idea? Email Customer Service.