Single-Strand Necklace and Earring Set with Swarovski® Crystals, Cool Frost Resin Beads™ and Gold-Plated Brass Cones

Single-Strand Necklace and Earring Set with Swarovski® Crystals, Cool Frost Resin Beads™ and Gold-Plated Brass Cones

For more inspiration, read this informative article ...

The Swarovski crystal four-leaf clover pendant is comprised of four hearts, making up a talisman that promises good luck and brightens any day. The four-leaf clover has been represented as a symbol of luck for centuries. This lucky charm is popular for ...

Necklace

STEP 1
Cut one 22-inch length of Accu-Flex® professional-quality beading wire.
STEP 2
String onto one 2-inch headpin:
  • One 10x3mm fancy leaf bead cap
  • One resin matte green 14mm round
  • One 12mm filigree cone
  • One chrysolite 4mm bicone
Form a wrapped loop creating a resin round drop.
STEP 3
Pass one 6.5x5mm oval jumpring through the loop on the resin round drops and two 4mm jumprings. Continue to connect a total of five sets of jumprings end to end creating an extender chain. Attach one last 6.5x5mm jumpring to the previous set of 4mm jumprings.

Attach one 6.5x5mm jumpring to the loop on one lobster claw clasp.
STEP 4
Line up the picks on one 29x11mm ice-pick bail with the hole in one dark moss green 28mm clover drop. Fit the picks through the hole then firmly pinch the legs of the bail together securing the drop.
STEP 5
String onto the beading wire: one crimp, one Accu-Guard™ wire protector and the last jumpring attached to the extender chain. Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the Accu-Guard leaving approximately 1/4 inch of beading wire on the end.

Crimp, then trim the excess from the short end of the beading wire. Finish with a 4mm crimp cover.
STEP 6
String the following onto the beading wire:
  • One 5x5 flower bead cap
  • One resin matte light green 6mm round
  • One 5x5 flower bead cap
  • One dark moss green 6mm bicone
Repeat this sequence to string a total of five sets.
STEP 7
Continue to string the following:
  • Repeat this sequence to string three sets:
    • One 6x1.5mm flower bead cap
    • One resin matte light green 8mm round
    • One 6x1.5mm flower bead cap
    • One dark moss green 6mm bicone
  • One 9x2mm ribbed bead cap
  • One resin matte light green 10mm round
  • One 9x2mm ribbed bead cap
  • One dark moss green 6mm bicone
  • One 9x2mm ribbed bead cap
  • One resin matte light green 10mm round
  • One 9x2mm ribbed bead cap
  • One chrysolite 4mm bicone
  • Repeat this sequence to string two sets:
    • One 9x2mm ribbed bead cap
    • One resin matte green 10mm round
    • One 9x2mm ribbed bead cap
    • One chrysolite 4mm bicone
  • Repeat this sequence to string two sets:
    • One 10x3 fancy leaf bead cap
    • One resin matte green 14mm round
    • One 10x3 fancy leaf bead cap
    • One chrysolite 4mm bicone
  • One 15x10mm leaf bead cap
  • One resin matte green 18mm round
  • One 17x14mm filigree cone
  • One chrysolite 4mm bicone
STEP 8
Continue to string the bail on the dark moss green 28mm clover drop then repeat Step 7 in the opposite direction to string the second half of the necklace. Repeat Step 5 using the jumpring on the lobster claw clasp to secure the strand.

Earrings

STEP 1
String the following onto one 1-1/2 inch eyepin:
  • One dark moss green 4mm bicone
  • One 6x1.5mm flower bead cap
  • One resin matte light green 8mm round
  • One 6x1.5mm flower bead cap
  • One dark moss green 4mm bicone
Form a simple loop on the straight end of the wire.

Repeat to create a second resin round link.
STEP 2
Attach a 19x15mm ice-pick bail to each dark moss green 19mm clover drop.
STEP 3
Pass the first loop on one resin round link through the loop on one ice-pick bail then close. Attach the loop on the opposite end of the resin round link to the loop on one fishhook earwire.

Repeat to create a second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You