Single-Strand Necklace and Earring Set with Czech Fire-Polished Glass Beads, Celestial Crystal® Glass Beads and Gold-Finished ''Pewter'' Drops

Using Accu-Guard™ Wire Protectors How-To Video and Illustrated Instructions

For more inspiration, read this informative article ...

Put some spring in your step and freshen up jewelry lines with this brilliantly beautiful and colorful jewelry set that will brighten any fashion statement. The graduated, symmetrical stringing pattern is a ...

Necklace

STEP 1
Cut one 22-inch length of Accu-Flex® professional-quality beading wire.
STEP 2
String onto the beading wire: one crimp, one Accu-Guard™ wire protector and the ring-on portion of the tab clasp. Pass the beading wire back through the crimp. Pull the beading wire so the crimp rests snug against the Accu-Guard leaving approximately 1/4 inch of beading wire on the end.

Crimp, then trim the excess from the short end of the beading wire. Finish with a 4mm crimp cover.
STEP 3
String the following onto the beading wire:
  • One 3x1mm ribbed bead cap
  • One pearlescent light pink 4mm round
  • One 3x1mm ribbed bead cap
  • One 3x1mm ribbed bead cap
  • One pearlescent lime green 4mm round
  • One 3x1mm ribbed bead cap
  • One 3x1mm ribbed bead cap
  • One pearlescent light pink 4mm round
  • One 3x1mm ribbed bead cap
  • One 3x1mm ribbed bead cap
  • One pearlescent light yellow 4mm round
  • One 3x1mm ribbed bead cap
Repeat this sequence to string a total of two sets.
STEP 4
Continue to string the following:
  • One 3x1mm ribbed bead cap
  • One pearlescent light pink 6mm round
  • One 3x1mm ribbed bead cap
  • One 3x1mm ribbed bead cap
  • One pearlescent lime green 6mm round
  • One 3x1mm ribbed bead cap
  • One 3x1mm ribbed bead cap
  • One pearlescent light pink 6mm round
  • One 3x1mm ribbed bead cap
  • One 3x1mm ribbed bead cap
  • One pearlescent light yellow 6mm round
  • One 3x1mm ribbed bead cap
  • One 6x1.5mm flower bead cap
  • One pearlescent light pink 8mm round
  • One 6x1.5mm flower bead cap
  • One 6x1.5mm flower bead cap
  • One pearlescent lime green 8mm round
  • One 6x1.5mm flower bead cap
  • One 6x1.5mm flower bead cap
  • One pearlescent light pink 8mm round
  • One 6x1.5mm flower bead cap
  • One 6x1.5mm flower bead cap
  • One pearlescent light yellow 8mm round
  • One 6x1.5mm flower bead cap
  • One 6x1.5mm flower bead cap
  • One pearlescent light pink 10mm round
  • One 6x1.5mm flower bead cap
  • One clear AB 6x3mm disc
  • One 6x1.5mm flower bead cap
  • One pearlescent lime green 10mm round
  • One 6x1.5mm flower bead cap
  • One clear AB 6x3mm disc
  • One 6x1.5mm flower bead cap
  • One pearlescent light pink 10mm round
  • One 6x1.5mm flower bead cap
  • One clear AB 6x3mm disc
  • One 6x1.5mm flower bead cap
  • One pearlescent light yellow 10mm round
  • One 6x1.5mm flower bead cap
  • One clear AB 6x3mm disc
STEP 5
Continue to string:
  • One 11x4 flower bead cap
  • One pearlescent light pink 12mm round
  • One 11x4 flower bead cap
  • One clear AB 6x3mm disc
  • One 11x4 flower bead cap
  • One pearlescent lime green 12mm round
  • One 11x4 flower bead cap
  • One clear AB 6x3mm disc
  • One 11x4 flower bead cap
  • One pearlescent light pink 12mm round
  • One 11x4 flower bead cap
  • One clear AB 6x3mm disc
  • One 11x4 flower bead cap
  • One pearlescent light yellow 12mm round
  • One 11x4 flower bead cap
  • One clear AB 6x3mm disc
  • One 11x4 flower bead cap
  • One pearlescent light pink 12mm round
  • One 11x4 flower bead cap
  • One clear AB 6x3mm disc
STEP 6
Repeat the stringing sequence Steps 5 and 6 in the opposite direction, switching the lime green and light yellow beads, to string the second half of the necklace.

Repeat Step 2 to secure the strand.

Earrings

STEP 1
String onto one 1-1/2 inch eyepin: one 3x1mm ribbed bead cap, one pearlescent light pink 6mm round and one 3x1mm ribbed bead cap. Form a simple loop on the straight end of the wire.

Repeat to create a second light pink round drop.
STEP 2
Pass the loop on one fishhook earwire through the loop on 21x20.5mm flat round drop with bird then close. Attach the loop on the light pink round drop to the flat round portion of the drop with bird.

Repeat to create a second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You