Three-Piece Necklace, Bracelet and Earring Set with Swarovski Crystal and Gold-Plated Brass Jumprings

30-Inch Necklace

STEP 1
Remove the twist-off end on the 30-inch snake chain.
STEP 2
String the following onto the chain:
  • Two 6mm twisted jumprings
  • Two 8mm twisted jumprings
  • One 10mm twisted jumpring
  • One 6mm twisted jumpring
  • Two 10mm twisted jumpring
  • One 6mm twisted jumpring
  • One creamrose 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One amethyst BeCharmed baguette
  • Three 8mm twisted jumprings
  • One coral 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One crystal AB 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
  • One dark moss green 14x9.5mm BeCharmed briolette
  • Three 8mm twisted jumprings
  • One crystal AB 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
  • One blackberry 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One crystal AB 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
STEP 3
Close Up of Stringing Continue to string the following:
  • One pastel green 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One aquamarine 10.5mm BeCharmed baguette
  • Three 8mm twisted jumprings
  • One pastel green 14x9.5mm BeCharmed pearl
Repeat Step 2 in the opposite direction to string the second half of the necklace.

Replace the twist-off end to secure.

24-Inch Necklace

STEP 1
Remove the twist-off end on the 24-inch snake chain.
STEP 2
String the following onto the chain:
  • Three 6mm twisted jumprings
  • Three 8mm twisted jumprings
  • Three 10mm twisted jumpring
  • One grey 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One aquamarine 10.5mm BeCharmed baguette
  • Three 8mm twisted jumprings
  • One creamrose 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One emerald 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
  • One red coral 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
STEP 3
Continue to string one peridot 10.5mm BeCharmed baguette then repeat Step 2 in the opposite direction to string the second half of the necklace.

Replace the twist-off end to secure.

18-Inch Necklace

STEP 1
Remove the twist-off end on the 18-inch snake chain.
STEP 2
String the following onto the chain:
  • Repeat this sequence to string two sets:
    • One 8mm twisted jumpring
    • One 6mm twisted jumpring
  • One 10mm twisted jumpring
  • One 6mm twisted jumpring
  • Two 10mm twisted jumprings
  • One Indian Siam 10.5mm BeCharmed baguette
  • Three 8mm twisted jumprings
  • One crystal AB 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
  • One Indian Siam 15mm BeCharmed pavé
  • Three 8mm twisted jumprings
  • One crystal AB 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
STEP 3
Continue to string one dark moss green 14x9mm BeCharmed helix then repeat Step 2 in the opposite direction to string the second half of the necklace.

Replace the twist-off end to secure.

Bracelet

STEP 1
Remove the twist-off end on the 8-1/2 inch snake chain.
STEP 2
String the following onto the chain:
  • Three 6mm twisted jumprings
  • Three 8mm twisted jumprings
  • Three 10mm twisted jumpring
  • One Tahitian 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One emerald 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
  • One jade 14x9.5mm BeCharmed pearl
  • Three 8mm twisted jumprings
  • One crystal AB 12x4.5mm BeCharmed rondelle
  • Three 8mm twisted jumprings
STEP 3
Continue to string one Indian Siam 14mm BeCharmed pavé then repeat Step 2 in the opposite direction to string the second half of the bracelet.

Replace the twist-off end to secure.

Earrings

STEP 1
Cut two 2-inch lengths of 2mm snake chain.
STEP 2
Insert one end of one length of chain into one crimp end with loop then crimp.
STEP 3
String the following onto the chain:
  • One 6mm round
  • One blackberry 14x9.5mm BeCharmed pearl
  • Four 6mm twisted jumprings
  • One peridot 10.5mm BeCharmed baguette
  • One 6mm round
Repeat Step 2 to secure creating a BeCharmed link.
STEP 4
Pass one 4mm jumpring through the loop on one Christmas ornament charm and the loop on one end of the BeCharmed link then close.

Attach the loop on the opposite end of the BeCharmed link to the loop on one kidney earwire.
STEP 5
Repeat Steps 2 - 4 to create a second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You