How to Make a Custom Charm
Design and Instructions by Linda Brandt, Multimedia Department, Exclusively for Fire Mountain Gems and Beads®
A13Y
STEP 1
 |
|
Remove all punches from the steel disc cutter. |
STEP 2
 |
|
Slide the metal sheet or item being punched between the plates of the disc cutter. |
STEP 3
 |
|
Place the size punch you want into the appropriate opening on the cutter base. Hit the punch once with a heavy hammer. |
STEP 4
 |
|
Remove the metal sheet; the cut-out disc will be separate. |
STEP 5
 |
|
Position the disc into an opening on the steel hole punch. Twist the handle of the punch until a hole is punched out. |
STEP 6
 |
|
Place the disc onto a steel block. Position a letter or number on the disc, and, with a heavy steel hammer, hit the end of the punch.Repeat to create a saying of your choice. |
STEP 7
Using a pair of flat-nose pliers and a pair of chain-nose pliers, open a jumpring.
STEP 8
Put the open jumpring through the charm. Close the jumpring.
: : : Additional Resources : : :
Have a question regarding this project?
Email Customer Service.
Copyright Permissions
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email copyrightpermission@firemtn.com
for more information.
.png)
.jpg)
.png){kind=icon}
.png)
.png)
