Molding A Reverse Mold or a Silicone Stamp with Brass Molds
||Portion equal quantities of each part of the silicone molding compound. Follow manufacturer's recommendations on mixing the compound (each brand has different guidelines).
||Place the compound onto the non-stick art sheet and pat into a pad large enough to accommodate the brass mold.
||Press the mold into the compound so it is pressed in completely and is level to the surface.
Allow the silicone compound to cure then remove the brass mold.
Use the cured silicone mold to create molded designs in polymer clay, metal clay or Apoxie® sculpt.
Optional: Trim the silicone mold to create a clean border around the molded area and use as a stamp to impress the design into polymer clay, metal clay or Apoxie Sculpt.
: : : Additional Resources : : :
Have a question regarding this project?
Email Customer Service.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email email@example.com
for more information.