How to Use an Alundum Stone
An alundum stone is an abrasive that will remove unwanted enamel from your design. You must work wet when using an alundum stone as the water helps remove the aluminum oxide residue created during the process and prevents you from inadvertently grinding the oxide into your glass surface.
||While working with a bowl of water or with running water, stone the edges of the blank with the 220 grit alundum stone.
If you find the enamel is not coming off, switch to the 150 grit then repeat with the 220 grit to finish.
: : : Additional Resources : : :
Have a question regarding this project?
Email Customer Service.
Permission to copy this instruction sheet is granted for non-commercial educational purposes only. All other reproduction
requires written permission. Please email email@example.com
for more information.