Spider-Themed Choker Necklace with Antiqued Sterling Silver Spider Charm, Gossamer™ Sterling Silver Figaro Chain and Crystal Passions® Mini Disk Drop

Cut the following lengths of Gossamer™ sterling silver 1.2mm figaro chain:

• Four 3-inch lengths
• Three 1.5-inch lengths

Attach a 12x5mm sterling silver and cubic zirconia ice pick bail to the front center of a black nylon choker necklace.

Attach a 5mm 22-gauge sterling silver round jump ring to the loop in the bail.

Attach 5mm 22-gauge sterling silver round jump rings to the choker necklace two inches and four inches from the enter on both sides of the bail.

With the central jump ring on the bail and the four jump rings on the necklace, you now have five points to which to attach the chains. Using a small awl, widen the end links on the lengths of chain you cut in Step 1. Attach the ends of a three-inch length of chain to one of the five jump rings and to the jump ring adjacent to it. Do the same with the other three-inch lengths of chain so that you have four loops of chain hanging from the necklace.

Attach a 1.5-inch length of chain to the jump ring on the bail and to the jump ring on one side of the bail. Repeat for the other side of the bail.

Attach the last 1.5-inch length of chain to the jump ring on the bail.

Using a 4mm 20-gauge round jump ring, attach an antiqued sterling silver spider charm to the jump ring below the bail.

Using a 5mm-22-gauge round jump ring, attach a Crystal Passions® 6mm Siam pendant mini disk drop to the bottom of the 1.5-inch chain hanging straight down from the jump ring on the bail.