Single-Strand Necklace, Bracelet and Earring Set with Swarovski Crystal and Seed Beads

Necklace

STEP 1
Using flush-cutters cut one 21-inch length of Accu-Flex® professional-quality beading wire.
STEP 2
String the following onto the beading wire:
  • One sterling silver 2x2mm crimp bead
  • One Accu-Guard™ wire protector
  • The loop on one half of a fishhook clasp
Pass the beading wire back through the crimp bead. Pull the beading wire so the crimp rests snug against the Accu-Guard leaving approximately 1/4 inch of beading wire on the end. Place a small amount of adhesive (Loctite®) inside the crimp (optional).

Using crimping pliers crimp the crimp bead. Using flush-cutters trim the excess from the short end of the beading wire. Place one silver-plated 4mm stardust crimp cover over the crimp bead then gently close it.
STEP 3
String the following onto the beading wire:
  • Six Czech glass metallic silver #11 seed beads
  • One Swarovski crystal blue shade 4mm bicone
  • One Swarovski crystal AB 4x2mm rondelle
  • One Swarovski crystal blue shade 8mm bicone
  • One Swarovski crystal AB 4x2mm rondelle
  • One Swarovski crystal blue shade 4mm bicone
  • Sixty Czech glass metallic silver #11 seed beads
STEP 4
Continue to string the following:
  • Three Swarovski crystal blue shade 4mm bicones
  • One Swarovski crystal AB 4x2mm rondelle
  • One Swarovski crystal blue shade 8mm bicone
  • One Swarovski crystal AB 4x2mm rondelle
STEP 5
Continue to string the following:
  • Three Czech glass metallic silver #11 seed beads
  • One Swarovski crystal blue shade 19x14mm wave
  • One Czech glass metallic silver #11 seed beads
  • One Swarovski crystal blue shade 19x14mm wave
  • One Czech glass metallic silver #11 seed beads
  • One Swarovski crystal blue shade 19x14mm wave
STEP 6
Continue to string the following:
  • Three Czech glass metallic silver #11 seed beads
  • One Swarovski rose 12x10mm wild heart bead
STEP 7
Repeat the stringing sequence in Step 5.
STEP 8
Continue to string the following:
  • Three Czech glass metallic silver #11 seed beads
  • One Swarovski crystal AB 4x2mm rondelle
  • One Swarovski crystal blue shade 8mm bicone
  • One Swarovski crystal AB 4x2mm rondelle
  • Three Swarovski crystal blue shade 4mm bicones
  • Nine Czech glass metallic silver #11 seed beads
STEP 9
Continue to string the following:
  • One sterling silver 2x2mm crimp bead
  • Approximately 1-1/2 inches Czech glass metallic silver #11 seed beads
  • One Swarovski crystal blue shade 27x22mm wild heart drop
STEP 10

Pass the beading wire back through the crimp bead from Step 7. Pull the beading wire so the crimp rests snug against the previous seed beads. Crimp the crimp bead. Place one silver-plated 4mm stardust crimp cover over the crimp bead then gently close it.
STEP 11
Repeat the stringing sequence in Step 8 in the opposite direction, repeat Step 5 then repeat the stringing sequence in Steps 3 - 6 in the opposite direction to create a mirror image of the first half of the strand.

Repeat Step 2 to secure the necklace.

Bracelet

STEP 1
Using flush-cutters cut one 9-inch length of beading wire.
STEP 2
String the following onto the beading wire:
  • One sterling silver 2x2mm crimp bead
  • One Accu-Guard wire protector
  • The loop on one half of a fishhook clasp
Pass the beading wire back through the crimp bead. Pull the beading wire so the crimp rests snug against the Accu-Guard leaving approximately 1/4 inch of beading wire on the end. Place a small amount of adhesive (Loctite) inside the crimp (optional).

Using crimping pliers crimp the crimp bead. Using flush-cutters trim the excess from the short end of the beading wire. Place one silver-plated 4mm stardust crimp cover over the crimp bead then gently close it.
STEP 3
String the following onto the beading wire:
  • Twelve Swarovski crystal blue shade 4mm bicones
  • One Swarovski crystal AB 4x2mm rondelle
  • One Swarovski crystal blue shade 8mm bicone
  • One Swarovski crystal AB 4x2mm rondelle
  • Three Swarovski crystal blue shade 4mm bicone
  • Three Czech glass metallic silver #11 seed beads
  • One Swarovski rose 12x10mm wild heart bead
  • Three Czech glass metallic silver #11 seed beads
STEP 4
Continue to string one Swarovski crystal blue shade 14x7mm fish.
STEP 5
Repeat the stringing sequence in Step 3 in the opposite direction.
STEP 6
Repeat Step 2 to secure the bracelet.

Earrings

STEP 1
Using a pair of chain-nose pliers and bent-nose pliers open two 4mm jumprings and two 6mm jumprings.
STEP 2
Pass one 6mm jumpring through the hole in one Swarovski crystal blue shade 19x14.5mm wave drop. Close the jumpring.
STEP 3
Pass one 4mm jumpring through the 6mm jumpring and the loop on one leverback earwire. Close the jumpring
STEP 4
Repeat Steps 2 and 3 to create a second earring.

: : : Additional Resources : : :

The pieces featured in the Gallery of Designs are copyrighted designs and are provided for inspiration only. We encourage you to substitute different colors, products and techniques to make the design your own.

Have a question regarding this design idea? Email Customer Service.

Recommended Just for You