Ask the Experts Beading Q&A
Q: I use Beadalon® 49-strand wire and 7-strand wire. What size crimps and wire protectors should I use on each size? Also, what size will I need if I use the 7-strand wire doubled?
Search Results for a8ls
Refine Your Results
Categories
Jewelry Medium (18)
Resin & Mixed Media (3)
Polymer Clay (1)
Bead Stringing (6)
Wireworking (7)
Fiber & Textile (1)
Design Style (8)
Western (1)
Seasonal & Holiday (2)
Minimalist (1)
Trends (1)
Boho (2)
Wedding Jewelry & Décor (1)
You Searched for:
a8ls
Ask the Experts Crimp Tube Sizes Q&A
Q: What is the difference between a micro, a cut and a regular crimp tube and the proper use of each one? Also, why are there fancy crimp tubes when you’re going to crimp them anyway? It seems like you'd loose the "fancy" look after crimping.
Ask the Experts Stringing Q&A
Q: I use Beadalon 49-strand wire and 7-strand wire. What size crimps and wire protectors should I use on each size. Also, what size will I need using the 7-strand doubled?
Ask the Experts Wire Q&A
Q: I am interested in making mobiles. I have used wire from hardware stores but would like to upgrade. Can you suggest a medium-grade wire for this purpose? I’m also concerned with changing color and rust.
Ask the Experts Storage Q&A
Q: Will anti-tarnish bags also work on metal alloys or only on silver, gold and copper? Many of the beads, bead caps and other findings are made of a type of alloy and tend to "tarnish" after a time. Will the anti-tarnish bags stop or slow the process down on those also? Thank you.
Ask the Experts Beading Q&A
Q: I’m having trouble with my seed bead fringe earrings. I’m always having an issue with curling. How do you keep them soft and flowy? I’m using Fireline 4lbs. Also it’s hard to find a balance between pulling them a little bit on the tighter side or having too much of a gap. Could it be the thread? What is the trick ?
Ask the Experts Labeling Q&A
Q: With the precious metal market so volatile, I've been using some silver plated findings in my designs. On my cards I tell of what each piece is made. Is there a legal explanation required when you have a piece, say, 20% silver plate, 80% sterling or can I just say SP and Sterling or Sterling w SP and leave it at that? I don't want to mislead my customers but I also want to point out that the piece is mostly sterling. My cards are not large so space is limited.
Ask the Experts Small Beads Q&A
Q: I have several strands of tiny 2.5mm diamond beads and am in a quandary as to the best way to string them. I've tried fishing line and extra fine beading wire, but I'm not satisfied with the results. I've also tried stringing them onto jump rings I made with 18K 30-gauge wire, but it made them look too spread out. Any suggestions?
Ask the Experts Stone Q&A
Q: I am wondering how to drill small holes in certain pieces to accommodate certain designs. How would I drill holes in sterling silver or brass components? Also, how would I drill an extra hole in a pendant made of howlite? HELP!
Ask the Experts Metals Q&A
Q: I'm hearing that aluminum is a good metal for jewelry chain. What are the benefits to using aluminum vs. sterling silver? Also, what is rhodium? Is it hypoallergenic? Thank you.
Ask the Experts Business/Pricing Q&A
Q: I am new to the jewelry making business and have been interested in a business of my own since my work related accident, which forced me into early retirement. I was doing a web search for something that would help in my fixed income and I came across Fire Mountain Gems and Beads and decided that this would be something that I could do from my home. I am interested in both making and buying the pre-made jewelry. I would like to know something about the price point system, regarding the pre-made jewelry. If I buy the pre-made pieces of jewelry, what sort of price range would be the best? For example, if I buy a pre-made necklace, what would my price point be? Say if the pre-made pieces of jewelry at wholesale cost would be $5.34. Would I multiply the wholesale cost by 2, 3, 4 times the cost, or what percent would I mark up the necklace? If I decide to sell this necklace with a bracelet and earrings, what would the markup be on this set? Also, if I buy a set of 6 of the same kind that cost $7.42 for the set of 6 how would I break this down to each individual piece? I will be setting up at the flea market and craft shows and making up my website and ebay store. Thank you.
Ask the Experts Cording Q&A
Q: Help! I'm trying to find cording that will knot well, is sturdy and visually appealing (like macrame) as much as the beads. I am making a Shekere, which is a percussion type instrument made from gourds. I will also need to know what size beads will fit with the diameter of the cord you recommend.Thank you so much!
Ask the Experts Metal Allergies Q&A
Q: Which wire is best for people who have allergies to nickel? Also, which wires hold up the best with wear and tear?
Ask the Experts Proper Gauge Wire for Wrapped Loops Q&A
Q: What gauge wire is recommended for making wrapped loops? I've tried the 22 and 24. They are too soft, for me, to work with. Would a lower gauge wire work best? I'm a newbie at this. Also, what would be the equivalent gauge size of a wire diameter of, say, .014 or .015"? I've seen only diameters of wires given, and I have no idea how to determine what the gauge would be.
Ask the Experts Beading Thread Q&A
Q: I am looking for a thread/cord that WON'T STRETCH and can be used with heavier beads and knotted to finish. I have read that Dandyline braided beading cord is a good one, but you don't carry it. So, which is the correct one to use? Also, I would like it to come in colors. Thank you.
Ask the Experts Tassels Q&A
Q: How do you use ''T'' drilled beads and end beads? Also, how do you make tassels?
Ask the Experts Viking Knit Q&A
Q: I have learned to make Viking knit chain and want to move from craft wire to gold-filled, sterling silver, or fine silver. I like 26 gauge but I'm not sure if I should use dead-soft or half-hard. After weaving, I draw the wire through a drawplate to even out the weave and stretch/thin the chain. It may be drawn through 2-8 times depending on how thin I want the final result to be. Hammering would deform the chain. Any recommendations? I'm also looking for appropriate end caps for the chain.
Ask the Experts Wire Gauge Q&A
Q: What gauge of metal wire should I use for making a beaded Christmas tree with size 11/0 seed beads? The wire needs to be strong enough to support the weight of many glass seed beads, plus miniature ornaments of metal and glass, but it also needs to be narrow enough to fit through the seed bead holes. Thanks for your help!
Ask the Experts Fine Silver and Silver Plate Q&A
Q: I made my first bracelets using silver-plated clasps (not from Fire Mountain Gems and Beads) and they discolored. I want to make good quality jewelry for gifts and don't want to waste money buying precious metal findings if they're not necessary, but I also don't want my pieces to tarnish easily. Can you guide me on when to use precious metal findings? What's the shelf life on silver-plate and gold-plate? I have asked others and researched online but am not getting a clear answer. Again, I might just have started with poor quality clasps and maybe both Fire Mountain's silver-plated and sterling will give me good results in all cases.
Ask the Experts Use with Polyester and Nylon Q&A
Q: I'm planning a pearl and mystic topaz necklace and my mystic topaz beads have a tiny hole (.24mm), so I need something very thin for stringing. But I also want it to hold up over time. I thought the thinnest Accu-Flex® wire might be good, but I'm not sure how I'd knot them between the pearls. Can the Bead Knotter™ be used with Accu-Flex® beading wire? Would another stringing material be better? Thank you for your help.
Ask the Experts Online Q&A
Q: I've sold some of my handmade jewelry online in the past while I was in high school, but I'm now in college, and I'd like to start again. I'm an Information Systems major, so I've got the skills and am planning to build my own website (though I'll also be attempting to sell some on Etsy). I've also been thinking about doing home parties, but some of my friends who are in different states were interested in hosting parties, which obviously won't really work. Do you have any ideas/tips for doing online jewelry parties so my friends can still host?
Ask the Experts Online Q&A
Q: I was thinking of starting to sell jewelry online but I am not sure if I would have to have a business license or any other legal documents to sell? Should I do it myself or go thru a site like Etsy.com? Also are there any other sites besides Etsy that I could try? Thanks!!
Ask the Experts Art Clay® Is Pure Silver Q&A
Q: I am interested in working with metal clay but was wondering if there is a difference between the silver clay and the pure silver that you can buy. Also, if I sold a piece of silver made from the clay, would I have to make a special note of it to the customer or could I just say it is pure silver?
Ask the Experts Setting Stones in Earring Findings Q&A
Q: I just purchased leverback earrings with settings to set stones into. I have both cabochons and faceted stones, which one is appropriate for this type of setting? Also, can you please advise how to set the stones so I'm sure they stay secure?
You supply the creativity, we supply everything else! ®