Single-Strand Necklace and Earrings with Mother-of-Pearl Shell, Gossamer™ Sterling Silver Chain and Crystal Passions® Beads

Cut one (1) 4-inch length of 24-gauge sterling silver dead-soft round wire.

Thread the wire through the hole of a mother-of-pearl shell trapezoid focal bead. Bring both wire ends together above the focal and bend one wire to a 90-degree angle. Make a wrapped loop.

String onto the straight wire:

• One 6x4mm Crystal Passions® scarlet rondelle
• One 8x5mm imitation "turquoise" rondelle
• One 6x4mm Crystal Passions scarlet rondelle

Form a wrapped loop above the beads, leaving the loop large enough for the Gossamer™ adjustable sterling silver 1.4mm cable chain to pass through. Trim excess the wire and tuck the end in neatly.

Slide the pendant onto the chain to complete the necklace.

Cut two (2) 3-inch lengths of 24-gauge sterling silver dead-soft round wire.

Thread one wire through the hole of a 13mm multicolored flat round resin drop. Bring both wire ends together and bend one wire to a 90-degree angle.

String one 8x5mm imitation "turquoise" rondelle and one 6x4mm Crystal Passions scarlet rondelle onto the straight wire.

Form a wrapped loop above the beads and attach to an ear wire. Trim excess wire and tuck neatly. Attach to ear wire.

Repeat Steps 1 - 4 to create the second earring.