Categories

Ask the Experts Paper Beads Q&A

Q: I am winding paper that is sparkly on one side and smooth on the other and when I go to glue it I can't get it to adhere and the bead becomes unwound. Help!

Read the Answer

Ask the Experts Design Q&A

Q: Is there a way to make quick-release drop earrings? In other words, can I buy one pair of earring findings and have a quick way of switching out one drop for another? Kind of like when you buy a watch face with several different colors/styles of bands?

Read the Answer

Ask the Experts Plating Q&A

Q: I have silver tone fashion jewelry that with only a few times of wearing it, the silver tone begins to rub off. I know they will not last a lifetime, but I can only wear them a few times before they look old and faded. I know this happens because of the oils on my skin and products I use. My question is the following, is there any type of silver tone or even sterling silver finish liquid or spray or even paint that you can brush on to "refinish" these pieces and make them look new again? Thank you!

Read the Answer

Ask the Experts Spacer Bars Q&A

Q: Hi, I am very new to beading and have run into a problem. I made a three strand bracelet and put 3 strand spacer bars (8995MB) into it. The back of the spacer bars look so lonely with the little strands of wire. Is there something I can use for that? Thank You.

Read the Answer

Ask the Experts Glue Removal Q&A

Q: I have dried glue on some of my tools. I'd like to know what to use to safely remove it. I'm also ordering your 'stuff' for dipping the tips for wireworking. When I have the tips coated, is that going to interfere with using them for future projects? If so, should I purchase a separate set?

Read the Answer

Ask the Experts Steel Wire Q&A

Q: I was surfing through a tool catalog and saw some rust- and corrosion-resistant 20 gauge x 25 foot mechanics wire with a 40 lb. maximum load capacity. It is Zinc-plated steel wire. I suppose the best question is..is it usable for jewelry and, if so, what about allergies. Thanks so much for your help.

Read the Answer

Ask the Experts Wire Q&A

Q: What is the difference between German Craft Wire and Artistic Craft Wire and which is better?

Read the Answer

Ask the Experts Metal Clay Q&A

Q: After firing metal clay earrings, I decided to try to bend a corner of one of them, and it snapped off! Was it not fired long enough? Is there any way to make a new piece and fire it on the existing earring?

Read the Answer

Ask the Experts Clay Q&A

Q: During a recent shopping trip I bought three containers of what was grouped with the metal clay supplies in a local hobby and craft store. The product brand is Pardo, and the company website gives the product as the metal listed combined with beeswax to help hold shape until firing. Firing is supposed to be done in a home or convection oven at 266 degrees Fahrenheit (130 degrees Celsius) for 30 minutes per 1/4-inch thickness. I bought one jar of gold, one jar of silver and one jar of bronze. My questions: How does this product match up to the other metal clay products on the market? Could this product be fired using a torch instead of an oven? And how might this product stand up long-term in items crafted with any of the clays purchased? Thank you.

Read the Answer

Ask the Experts Wire Twister Q&A

Q: My wire keeps breaking when I am using my wire twister tool. Sometimes the wire breaks off in the twister and other times the folded end will break in the vice. This can happen after only a few twists. How can I keep my wire from breaking?

Read the Answer

Ask the Experts Design Q&A

Q: Hello, I am having a hard time getting my earrings to hang straight. They want to turn either to the right or left. Is it because I'm hand drilling the center of my brass? Thank you.

Read the Answer

Ask the Experts Kumihimo Q&A

Q: I'm trying to learn Kumihimo, but I'm not sure what kind of thread I should use. Do you have any suggestions for me?

Read the Answer

Earrings

Add a touch of holiday spirit to your look with our Christmas earrings featuring jolly Santa Claus charms, intricate lampworked glass beads, Crystal Passions®-enhanced lustrous Pearls, and dazzling elements.

Design Idea PG3M

View Design

Ask the Experts Replacing Glued Rhinestones Q&A

Q: I have some pieces that have some rhinestones in them that don't look so good. I want to remove and replace them without damaging the metals, but it seems they are glued in. Is it possible to remove them?

Read the Answer

Ask the Experts Polymer Clay Q&A

Q: Can you put sand into polymer clay and bake it? I have someone who wants beads from a Florida trip made with sand.

Read the Answer

Ask the Experts Chain Measuring Q&A

Q: Chain tassels and fringe are really popular. I like to create them, but it is a serious pain to count links or measure multiple lengths of chain all the same length, especially tiny chain. Do you have a tip to simplify tassels and fringe?

Read the Answer

Ask the Experts Business Q&A

Q: What is a juried craft show?

Read the Answer

Ask the Experts Business Q&A

Q: I am fairly new to jewelry making (3 yrs.). I have been learning by making items from magazines and books. These items were gifts for friends and family. I recently started creating my own items. In a recent trip to a bead store, the shop owner liked my bangle bracelet. When I told them it was my own creation, they wanted to buy my instructions and teach it at their shop. Should I do that? If I do, how do I put a value on instructions? What am I giving up by doing that? I don't have a business. I eagerly await your reply. Thanks.

Read the Answer

Ask the Experts Resin Q&A

Q: What can be used to color resin? Also, what can be added to resin? What can be added to resin to give it a pearlized effect? Thanks.

Read the Answer

Ask the Experts Gemstones Q&A

Q: Are the value and quality of your gemstones comparable to that in jewelry stores that sell finished products?

Read the Answer

Ask the Experts Shows Q&A

Q: A friend of mine is a jewelry maker whose style is very different from mine. We both want to sell at the same local arts event, and she suggested we split a booth and sell together to save money. I'm not sure if I should take her up on this offer because of any hard feelings if one of us sells more than the other.

Read the Answer

Ask the Experts Solder Q&A

Q: First, how can I solder silver-filled pieces onto copper or brass without the alloys in the silver-filled showing? And for this reason, I'm assuming silver-filled CANNOT be annealed? Second, do some metals take longer to anneal than others? I'm new to jewelry making and will be working with copper, brass and sterling silver. Thank you for your time.

Read the Answer

Ask the Experts Jewelry Repair Q&A

Q: Is there a way to remove a crimp bead cover from a finished necklace? I used a 4mm crimp bead cover at the very end of my necklace. But I feel my necklace has little flexibility, and the toggle bar of my clasp does not move freely. I think removing the cover and replacing it with a smaller crimp bead cover might take care of the problem. Any other ideas what I could do without pulling my necklace apart?

Read the Answer

Ask the Experts Metal Sheets Q&A

Q: Thank you so much for providing answers to my many questions. I hadn't realized this was an option. I've been fascinated with Argentium, but I can't find much in the way of instructional materials. I have several questions for you, and I thank you in advance for taking time to answer.

Read the Answer

Tags

Categories