Q: I have several strands of tiny 2.5mm diamond beads and am in a quandary as to the best way to string them. I've tried fishing line and extra fine beading wire, but I'm not satisfied with the results. I've also tried stringing them onto jump rings I made with 18K 30-gauge wire, but it made them look too spread out. Any suggestions?

Q: Sure hope you can help me. I'm making a necklace and my pendant is a lampwork bead, sort of rondelle shaped. I want to use a large jump ring, 17mm, but I am having trouble as it does not seem secure on the necklace. Is there something I can use or some technique to keep this ring securely closed? I really don't want to invest in or learn soldering. Thank you so much.

Q: Hello, I am making lots of sterling silver and gemstone pieces (mostly earrings). How should I care for the pieces? Can I use a silver polish when the pieces have bead components? Thanks for your advice.

Q: I have a bracelet I made out of large chunks of turquoise and spaced out with much smaller coral and bronze beads. The problem is that my arm hairs get pinched really badly, even though I tried to leave some room for the beads to move around. Is there a trick to knowing how much room to leave so the beads can move without pinching?

Q: What is the best way to compensate for stringing beads that have different hole sizes?

Q: I'm making hatbands, but I don't know how to finish the ends. They need to be adjustable. Do you have any ideas? I'd prefer to NOT sew the bands to a backing. Thanks!

Q: I have a glass pendant that the loop broke off of. How can I wire wrap it and put a loop at the top, where the glass loop broke off?

Q: I have some carved shell flowers. The hole is in the middle of each flower. How do I attach beads, and how do I make them into earrings?

Q: I just bought some beads, charms and hoops to make wine charms. They look great, but the beads fall off easily. Do you have any suggestions for what I could do to fix this? I bought 25mm, 24-gauge hoops. Thanks!

Q: I am just not good with knots. I would prefer to use crimp tubes on stretch cord ("powercord"). I would like some reassurance that finished bracelets would last for a long time with wear. Have you had any testimonies from clients on this, and what is your opinion?

Q: I have sold my jewelry and wire work on consignment before, with pretty good success. However, I recently spoke with a shop owner who wanted me to pay a nonrefundable consignment fee to sell my work. I'd honestly never heard this before, and I'm a bit wary. Should I be?

Q: I am new to the jewelry making business and have been interested in a business of my own since my work related accident, which forced me into early retirement. I was doing a web search for something that would help in my fixed income and I came across Fire Mountain Gems and Beads and decided that this would be something that I could do from my home. I am interested in both making and buying the pre-made jewelry. I would like to know something about the price point system, regarding the pre-made jewelry. If I buy the pre-made pieces of jewelry, what sort of price range would be the best? For example, if I buy a pre-made necklace, what would my price point be? Say if the pre-made pieces of jewelry at wholesale cost would be $5.34. Would I multiply the wholesale cost by 2, 3, 4 times the cost, or what percent would I mark up the necklace? If I decide to sell this necklace with a bracelet and earrings, what would the markup be on this set? Also, if I buy a set of 6 of the same kind that cost $7.42 for the set of 6 how would I break this down to each individual piece? I will be setting up at the flea market and craft shows and making up my website and ebay store. Thank you.

Q: If I buy a licensed college or pro team charm and use it in a jewelry design, do I have the right to resell it?

Q: Are there any downsides to using screw-tites versus crimps? I would like to have info about the pros/cons of the two. Thank you.

Q: Could you please do a video on twisting wire using a pin vise—I have a pin vise from Fire Mountain and do not know how to use it. The wooden knob swivels, but the wire does not twist. Thank you

Q: I'm trying to solder Argentium Silver wire. Everything I have read says that I don't need flux, but when I soldered the wire, it went black—like sterling—and didn't melt. Can you suggest a good flux and give some direction on how to solder?

Q: I have just restrung a coral necklace my father had given my sister. It was on silk thread and the ends of the thread were glued into the clasp's round bead ends. How do I finish it now that I have all the coral strung on silk? How do I get the clasp on, and what type of clasp can I use on silk thread?

Q: Hi, I am new at jewelry-making. Do I have to use a beading needle with the Accu-Flex® wire? Will it speed up the process? Thanks!

Q: When using a magnetic clasp, I always have trouble keeping the clasp from attaching itself magnetically to my crimping pliers. This makes crimping difficult. Do you have any suggestions for keeping the magnet away from the pliers?

Q: I have started making personalized, metal-stamped, sterling necklace charms. I am having a hard time figuring out what type of "necklace" material to use. I love the look of a chain but cannot seem to find spacer beads to fit over the clasps on either end to go between the silver discs. (I do not want to use crimp beads, as I like the movement and changeability of the charms, and this would inhibit it.) Thank you SO much for your time and help!!

Q: How do you keep top-drilled beads going in an alternating pattern on a necklace or bracelet? I have some small pearls that I would love to use.

Q: I need tips, please, on how to organize a large inventory of beads and findings. Not the physical components—trays, bags, etc.—but the logical organization. Do the experts find it most useful to organize by color? By size? By material? By shape? Which are the main categories, and how are items sorted within the main categories? For example, beads might be organized first by main color (pink, yellow, black), then by big category of material (gemstone, glass), then specific material (calcite, mookaite, crystal, crackle glass, lampwork). Then within material by size or shape. What logical organization works best for you to help you find what you need quickly? Do different people organize different ways? How do you organize strands that have mixed colors or materials?

Q: I recently made a ring out of Art Clay silver, and can't get it off the mandrel! I've found a lot of suggestions for preventing Art Clay from sticking in the future, but none that help me fix what's already been done. How do I get my ring free without breaking it or having to start over?

Q: I was given a battery operated bead reamer as a gift, but am hesitant to try it. I was watching your bead reamer video and didn't even see a powered version mentioned as an option. It seems to me the hand versions offer more control. Do you have any recommendations?