Jewelry Making Resources | Fire Mountain Gems and Beads

Ask the Experts Hatbands Q&A

Q: I'm making hatbands, but I don't know how to finish the ends. They need to be adjustable. Do you have any ideas? I'd prefer to NOT sew the bands to a backing. Thanks!

Read the Answer

Ask the Experts Stringing Q&A

Q: I've been beading for about a year and my biggest issue is the excess wire at the end of my project. Is there a trick to threading it into the strand of beads?

Read the Answer

Ask the Experts Wirewrapping Q&A

Q: I have a glass pendant that the loop broke off of. How can I wire wrap it and put a loop at the top, where the glass loop broke off?

Read the Answer

Ask the Experts Mixed Media Pendant Q&A

Q: I am seeing cabochons used with pictures and words, and I want to use this style to make a 50th wedding anniversary piece for my mom. Is it just printer paper, or is there a certain glue or mounting that has to be used?

Read the Answer

Ask the Experts Colorfast Q&A

Q: How do I check for colorfastness?

Read the Answer

Ask the Experts Metals Q&A

Q: I'm hearing that aluminum is a good metal for jewelry chain. What are the benefits to using aluminum vs. sterling silver? Also, what is rhodium? Is it hypoallergenic? Thank you.

Read the Answer

Ask the Experts Leather Q&A

Q: How do you get the kinks, creases, etc. out of leather cord or other types of cord so it will lay nicely?

Read the Answer

Ask the Experts Restringing Q&A

Q: Is there some magic way to attach a crimp tube with an attached clasp to a finished piece strung on wire? Attaching the first tube at one end is easy, but when attaching the second one, the wire slips back through the beads (and then the beads fall off the wire causing endless frustration)--and the wire is cut so short (to fit into the crimp), there's nothing to grasp. The opening on the tube is so narrow that it would be nearly impossible to put a long piece of wire through the tube and cut it later. Any suggestions?

Read the Answer

Ask the Experts Ribbon/Beading wire Q&A

Q: How do I attach a ribbon to a beading wire?

Read the Answer

Ask the Experts Center-Drilled Q&A

Q: I have some carved shell flowers. The hole is in the middle of each flower. How do I attach beads, and how do I make them into earrings?

Read the Answer

Ask the Experts Oval Jump Rings Q&A

Q: I am making earrings and a necklace using 2-3 links. Should I use a round jump ring or an oval jump ring to attach the links?

Read the Answer

Ask the Experts Right-Angle Weave Q&A

Q: I am totally new to beading. I want to make a right-angle-weave bracelet. Can you tell me where to find instructions for adding the center bead to each right angle group? Thanks.

Read the Answer

Ask the Experts Wine Charms Q&A

Q: I just bought some beads, charms and hoops to make wine charms. They look great, but the beads fall off easily. Do you have any suggestions for what I could do to fix this? I bought 25mm, 24-gauge hoops. Thanks!

Read the Answer

Ask the Experts Stringing Q&A

Q: I would like to string some heavy gemstone beads on elastic. What's the best material to use and how do I finish it? If I tie it, how do I hide the knot? Thanks.

Read the Answer

Ask the Experts Crimping Q&A

Q: I am just not good with knots. I would prefer to use crimp tubes on stretch cord ("powercord"). I would like some reassurance that finished bracelets would last for a long time with wear. Have you had any testimonies from clients on this, and what is your opinion?

Read the Answer

Ask the Experts Business/Consignment Q&A

Q: I have sold my jewelry and wire work on consignment before, with pretty good success. However, I recently spoke with a shop owner who wanted me to pay a nonrefundable consignment fee to sell my work. I'd honestly never heard this before, and I'm a bit wary. Should I be?

Read the Answer

Ask the Experts Business/Pricing Q&A

Q: I am new to the jewelry making business and have been interested in a business of my own since my work related accident, which forced me into early retirement. I was doing a web search for something that would help in my fixed income and I came across Fire Mountain Gems and Beads and decided that this would be something that I could do from my home. I am interested in both making and buying the pre-made jewelry. I would like to know something about the price point system, regarding the pre-made jewelry. If I buy the pre-made pieces of jewelry, what sort of price range would be the best? For example, if I buy a pre-made necklace, what would my price point be? Say if the pre-made pieces of jewelry at wholesale cost would be $5.34. Would I multiply the wholesale cost by 2, 3, 4 times the cost, or what percent would I mark up the necklace? If I decide to sell this necklace with a bracelet and earrings, what would the markup be on this set? Also, if I buy a set of 6 of the same kind that cost $7.42 for the set of 6 how would I break this down to each individual piece? I will be setting up at the flea market and craft shows and making up my website and ebay store. Thank you.

Read the Answer

Ask the Experts Business/Licensed Logos Q&A

Q: If I buy a licensed college or pro team charm and use it in a jewelry design, do I have the right to resell it?

Read the Answer

Ask the Experts Bead Holes Q&A

Q: How can I remove dried glue from a bead hole so I can use the bead again? Thank You.

Read the Answer

Ask the Experts Fold-Over Clasp Q&A

Q: How do you attach a fold clasp to beading wire?

Read the Answer

Ask the Experts Crimps Q&A

Q: Are there any downsides to using screw-tites versus crimps? I would like to have info about the pros/cons of the two. Thank you.

Read the Answer

Ask the Experts Straightening Q&A

Q: Could you please tell me the best way to straighten wire for wrapping, as coiled wire is still curved? Thanks

Read the Answer

Ask the Experts Rotary Tumbler Q&A

Q: I recently bought a Lortone Rotary Tumbler and would like to tumble metal in it. How do I do this? The instruction booklet doesn't address this. Thank you.

Read the Answer

Ask the Experts Twisting Q&A

Q: Could you please do a video on twisting wire using a pin vise—I have a pin vise from Fire Mountain and do not know how to use it. The wooden knob swivels, but the wire does not twist. Thank you

Read the Answer

Ask the Experts Stones Q&A

Q: I'm interested in embedding very tiny CZ's in a PMC pendant. The stones are too small to use pliers to pick up, so I'm not sure how to do this.

Read the Answer

Ask the Experts Sizing Q&A

Q: Can sterling silver rings be sized up?

Read the Answer

Ask the Experts Soldering Q&A

Q: I'm trying to solder Argentium Silver wire. Everything I have read says that I don't need flux, but when I soldered the wire, it went black—like sterling—and didn't melt. Can you suggest a good flux and give some direction on how to solder?

Read the Answer

Ask the Experts Restringing Q&A

Q: I have just restrung a coral necklace my father had given my sister. It was on silk thread and the ends of the thread were glued into the clasp's round bead ends. How do I finish it now that I have all the coral strung on silk? How do I get the clasp on, and what type of clasp can I use on silk thread?

Read the Answer

Ask the Experts Bezel Q&A

Q: Which bail do I buy to attach to a sterling silver bezel cup, and how do I go about this? I want to make pendants.

Read the Answer

Ask the Experts Stringing Q&A

Q: Hi, I am new at jewelry-making. Do I have to use a beading needle with the Accu-Flex® wire? Will it speed up the process? Thanks!

Read the Answer

Ask the Experts Design Q&A

Q: What is the best way to make a simple loop at the top of a headpin that will keep multiple beads on the headpin from twirling around (so that they stay stable and facing forward)?

Read the Answer

Ask the Experts Finishing Q&A

Q: I bought some flex wire and am not sure how to tie the knot when I'm finished. What is the best way to tie the knot so that it stays tied?

Read the Answer

Ask the Experts Magnetic Q&A

Q: When using a magnetic clasp, I always have trouble keeping the clasp from attaching itself magnetically to my crimping pliers. This makes crimping difficult. Do you have any suggestions for keeping the magnet away from the pliers?

Read the Answer

Ask the Experts Paua Q&A

Q: What's the difference between a paua shell and an abalone shell?

Read the Answer

Ask the Experts Measurement Q&A

Q: A customer recently complained that I described the measurements of a bead incorrectly. If I say a bead is 10mm, does that mean wide on the string (perpendicular to string), or thickness hole to hole (parallel to string)?

Read the Answer

Ask the Experts Caprice Q&A

Q: Please can you tell me what size snake chain is best to use for Pandora beads. If I buy the chain in lengths without clasps how do I fix the clasp to the chain?

Read the Answer

Ask the Experts Necklace Q&A

Q: I have started making personalized, metal-stamped, sterling necklace charms. I am having a hard time figuring out what type of "necklace" material to use. I love the look of a chain but cannot seem to find spacer beads to fit over the clasps on either end to go between the silver discs. (I do not want to use crimp beads, as I like the movement and changeability of the charms, and this would inhibit it.) Thank you SO much for your time and help!!

Read the Answer

Ask the Experts Wire Q&A

Q: When making wrapped wired drop earrings, how can I be sure they will be the same length? Thank You.

Read the Answer

Ask the Experts Metal Clay Q&A

Q: Can you mix the different Art Clays, the slow drying and the regular? Or do they need to be used seperately because of different working times?

Read the Answer

Ask the Experts Memory Wire Q&A

Q: I want to make a necklace by memory wire, but the diameter of the necklace memory wire is smaller than the diameter of the necklace that I want to make. How can I make the wire open a little bit bigger than its memory diameter?

Read the Answer

Ask the Experts Metals Q&A

Q: Is nickel used in the making of copper wire for jewelry?

Read the Answer

Ask the Experts Beading Q&A

Q: How do I enlarge the hole in plastic beads? I am making a craft that requires running a 1.5 inch ribbon through the bead. What tool can I use to enlarge the hole? I bought the diamond reamer but it does not work on plastic!!!

Read the Answer

Ask the Experts Design Q&A

Q: How do you keep top-drilled beads going in an alternating pattern on a necklace or bracelet? I have some small pearls that I would love to use.

Read the Answer

Ask the Experts Organizing Q&A

Q: I need tips, please, on how to organize a large inventory of beads and findings. Not the physical components—trays, bags, etc.—but the logical organization. Do the experts find it most useful to organize by color? By size? By material? By shape? Which are the main categories, and how are items sorted within the main categories? For example, beads might be organized first by main color (pink, yellow, black), then by big category of material (gemstone, glass), then specific material (calcite, mookaite, crystal, crackle glass, lampwork). Then within material by size or shape. What logical organization works best for you to help you find what you need quickly? Do different people organize different ways? How do you organize strands that have mixed colors or materials?

Read the Answer

Ask the Experts Art Clay® Q&A

Q: I recently made a ring out of Art Clay silver, and can't get it off the mandrel! I've found a lot of suggestions for preventing Art Clay from sticking in the future, but none that help me fix what's already been done. How do I get my ring free without breaking it or having to start over?

Read the Answer

Ask the Experts Earwires Q&A

Q: I want to make my own ear wires. My "affordable" jewelry is made with sterling silver plated wire that has a clear tarnish resistant coating. Is this kind of wire "safe" to use as ear wires?

Read the Answer

Ask the Experts Bead Reamer Q&A

Q: I was given a battery operated bead reamer as a gift, but am hesitant to try it. I was watching your bead reamer video and didn't even see a powered version mentioned as an option. It seems to me the hand versions offer more control. Do you have any recommendations?

Read the Answer

Ask the Experts Wind Chime Q&A

Q: I'm making a wind chime from some old stained glass pieces. I bought some memory wire from you a while back, but haven't tried it yet for this purpose. Will it hang straight when used or do you have another idea for connecting my pieces. Thanks!

Read the Answer

Categories

Tags

Learn