Q: What is the difference between saltwater and freshwater pearls?

Q: What needle should I use for my seed bead project?

Q: When I use my split ring pliers to open the ring and put a charm on, I seem to "ruin" the ring. It doesn't close back up properly, but remains separated from the center. Am I opening them incorrectly?

Q: Can garments which have been embellished with hot fix rhinestones be ironed safely? Or will the heat of the ironing cause them to un-adhere? I would be ironing at synthetic or silk settings, not at high.

Q: How do you secure cord coils to rubber cord? The fit is pretty tight, but is there some way to secure it further? Thanks.

Q: I would like to start using pure copper beads and findings, but I'm not sure about whether or not they can be cleaned at all, and if so, how? What about copper plated items?

Q: I'm curious about cup chain and cup-chain link mesh. Exactly what is it and how is it used? Thank you

Q: I am going to add some crystals to wooden letters. What would be better, flat backs or hot fix, and what glue would I use? If hot fix is better, how do you use them? Thank you

Q: My great aunt used to tie her beaded necklaces into a lover's knot, but I have lost the instructions. Do you know how?

Q: How do you know what size thread to use for a necklace strung with knots in between each bead? I have had experience with the beads slipping over the knots.

Q: How do you clean the black off around the holes of the beads ... this is from the wire rubbing with wear? Thanks.

Q: What on earth is druzy and what is druzy quartz and blue lace agate druzy? Merriam-Webster on-line does not recognize the word druzy.

Q: What should I use to clean up any excess Apoxie from my piece? Should the excess be removed before set and dry?

Q: I recently completed a bracelet using various colors and two sizes of seed beads. After wearing the bracelet once, I noticed the finish on the semi-transparent, size 8 purple ones wore off over some of the exposed surfaces. I'm told this problem happens often with purple and red beads. Any suggestions?

Q: I have some opals stored in glycerine oil. They have been in oil since the 1930s. Must they stay in the oil or can I put them in cage bails?

Q: Only a few of your pearls indicate a grade in the description. Does that mean that the others are D grade or below? Thanks.

Q: How do you use spring coils? I often see them in men's jewelry.

Q: I have some copper pieces that I would like to look a bit darker, more antique. What product should I use to do this?

Q: Someone I know purchased a bracelet from an art gallery - it was silver and copper. She told me that the first time she wore the bracelet it got wet and the parts that were copper turned black. Why would this happen?

Q: I'm looking for your video or answer on how to join a new thread onto an existing thread for projects that need you to use a lot of thread, like necklaces, etc. What I mean is: I have started my project (beaded fringe on a bracelet, just like your video) and the string is now too short to do any more beading. How do I join the next piece of thread? Thank you.

Q: I am attempting to make a jeweled leather dog collar. I would like to affix rhinestones and other colored crystal stones to the smooth leather face of the collar. The stones I am using are framed and backed in silver tone metal without rivets or claws to grip the leather. What is the best way to permanently attach these stones to the leather collar?

Q: I would like to know how to get started with seed beads. I want to seed bead a 5" hoop to make a dreamcatcher. All I want to do is the outside (if not) the hoop in seed beads. Thank you.

Q: I am trying to learn the benefits of resin beads over plastic beads, what are the characteristics of resin beads?

Q: What is the best size and type of sterling silver wire to make earring wires?

Q: I have seen a necklace that I would love to make, but I need advice on the clasp at the back. The necklace was 10 strands of silk thread with pearls and crystals knotted about 1 to 1-1/2 inches apart. It looked like a crimp with a loop that finished it off, but I am unsure which one to order to complete the necklace, or even if this is the right way to go. Can you please advise? Thanks so much!

Q: When working with wood beads, what type of stringing material works best?

Q: How do you make earrings for people who don't have pierced ears?

Q: Do you know of a way to clean cat's eye beads?

Q: Is there a rule of thumb for what gauge of headpins to use for various projects (i.e. making dangles on earrings, adding a dangle to a bracelet, etc.)?

Q: How do I get my pieces clean after people handle it at a show, and get fingerprints off, too?

Q: I've come across the terms "lentil beads" and "melon beads." What are they? How do you describe them?

Q: I am looking for the Crystal Passions® bead colors for all the different cancers. I have breast cancer and want to make bracelets for the nurses at the oncology department at my hospital. I know there are names for them, but they do not match the beads. Can you help?

Q: I think your how-to videos are a wonderful addition to your site. I was watching the bead tip and French wire videos in particular. My question/suggestion is that I don't have a problem with finishing my jewelry on the first end but after the stringing is complete it is the second end which gives me trouble, when you have to tighten the string so that there are no loose beads. French wire is very difficult to use, but doubly so when you are finishing the second end. For example: when I pull the loop, the wire tends to spread and becomes useless. Can you include the second half of the how-to as well as the first?

Q: How do you avoid leaving fingerprints on your polymer clay beads?

Q: What kind of dye can I use on bone beads?

Q: Can crimp beads be used with thread?

Q: How do I choose the size stretch cord to make bracelets?

Q: Can any size bead be used for tubular peyote, or is it confined to the smaller beads? What shape bead works best?

Q: I am new to loom working and would like to know how to attach my project to a steel bracelet blank.

Q: I have several strands of tiny 2.5mm diamond beads and am in a quandary as to the best way to string them. I've tried fishing line and extra fine beading wire, but I'm not satisfied with the results. I've also tried stringing them onto jump rings I made with 18K 30-gauge wire, but it made them look too spread out. Any suggestions?

Q: What size silk cord or thread is needed to make tassels?

Q: What is the difference between saltwater and freshwater pearls?

Q: Sure hope you can help me. I'm making a necklace and my pendant is a lampwork bead, sort of rondelle shaped. I want to use a large jump ring, 17mm, but I am having trouble as it does not seem secure on the necklace. Is there something I can use or some technique to keep this ring securely closed? I really don't want to invest in or learn soldering. Thank you so much.

Q: I am wondering how to drill small holes in certain pieces to accommodate certain designs. How would I drill holes in sterling silver or brass components? Also, how would I drill an extra hole in a pendant made of howlite? HELP!

Q: I've used toothpaste to clean my silver necklace for about the last 4-5 years. I was just wondering if I was ok in using it, or am I hurting my necklace?

Q: Ring sizes: I notice you often mention ring size 6 or 7 etc. Is this size in mm? And what is the average ring size for a lady?

Q: I have a bracelet I made out of large chunks of turquoise and spaced out with much smaller coral and bronze beads. The problem is that my arm hairs get pinched really badly, even though I tried to leave some room for the beads to move around. Is there a trick to knowing how much room to leave so the beads can move without pinching?

Q: What size bead should I use to put between charms for a Pandora or Biagi bracelet? The mm means next to nothing to average people. Thanks!